RL V6-3.5L (2007)
8. Remove the outer handle base (A).
1. Loosen the nut.
2. Release the tab (B), and slide the outer handle base forward to release the special bolt (C) from the door panel.
9. Install the handle in the reverse order of removal, and note these items:
-
Reinstall the outer handle holder before installing the outer handle cover.
-
Make sure the outer handle rod is connected securely.
-
Make sure the door lock operates properly.
-
Make sure the door handle works properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to prevent water
leaks.
