RL V6-3.5L (2007)
4. Release the double-sided adhesive tapes (A), and using a trim tool, detach the pins (B) of the trunk lid shield (C), then remove the trunk lid shield
and the grommet (D).
5. Install the hinge in the reverse order of removal, and note these items:
-
Scrape off the remaining double-sided adhesive tape from the shield, then clean the shield surface with a sponge dampened in alcohol.
-
Apply the new adhesive tape (A) to the trunk lid shield (B).
-
Before installing the trunk lid, replace the trunk lid insulation washers (C) and the trunk lid mounting bolts with new ones.
-
Push the adhesive portions into place securely.
