RL V6-3.5L (2007)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Removal/Installation - Trunk Area
Trim Removal/Installation - Trunk Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the spare tire lid (A) and spare tire spacer(B).
2. Detach the clips, and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove it.
