RL V6-3.5L (2007)
3. Release the clips (A, B) and fasteners (C), then remove the trunk front trim panel (D).
4. Remove the tie down hooks (A) and trunk hooks (B) from both trunk side trim panels.
1. Pry out the lids (C) with a trim tool, then remove all of the tie down hooks by unscrewing them.
2. Pry out the caps (D) with a trim tool, then remove both trunk hooks by pulling them out.
5. Detach the clips, then remove the left trunk side trim panel (A) and the right trunk side trim panel (B) from the trunk compartment.
6. Remove the trunk light.
