RL V6-3.5L (2007)
Grille: Service and Repair
Upper Grille Cover
Upper Grille Cover Replacement
Special Tools Required
-
KTC trim tool set SOJATP2014 *
-
Push pin puller 07AAC-SJAA100
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the front bulkhead and body.
1. Pull up the front portion of the upper fender trim, from each side.
2. Detach the clips (A, B). Using a trim tool, detach the hooks (C) and clip (D), then remove the upper grille cover (E).
3. Install the upper grille cover in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
