RL V6-3.5L (2007)
7. Using a flat-tip screwdriver, pry up the retainer (A), then remove the glove box lock cylinder (B).
NOTE: Wear eye protection when doing this step.
8. Set the retainer (A) into the lock body, then push the lock cylinder into the lock cylinder body until it snaps into the retainer.
9. Install the lock knob body in the reverse order of removal, and note these items:
-
Before installing the lock knob body to the glove box, make sure the lock cylinder operates properly.
-
Replace the spring pins with new ones.
-
Before installing the spring pins, apply grease them.