RL V6-3.5L (2007)
* Available through the American Honda Tool and Equipment Program;
Rear Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Detach the hook (A) and tab (B) from the B-pillar lower trim (C) and seat side trim (D), and pull the rear door sill trim (E) up by hand to detach
the clips (F), then remove it from the rear door opening trim (G).
2. If necessary, pull he rear side outer trim (H) up to detach the clips (I, J), then remove the trim.
3. Pull out the rear door opening trim (A) from the trim hooks (B) and around the rear door opening flange, then remove the trim.
4. install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips and hooks into place securely.
