RL V6-3.5L (2007)
Paint: Service and Repair
General
General Precautions
The 3-coat,3-bake (3C,3B) overcoat clear coats paint finish gives the Acura RL a deep gloss and stunning finish. This manual provides information on
paint defect, repair, and refinishing. Throughout, the objective is to explain in a simple yet comprehensive manner the basic items you should know
about paint repairs.
Basic Rules for Repairing a paint Finish
To repair paint damage, always use the 2-part acrylic urethane paints designated; polish and bake each of the three coats, as in production, to maintain
the original film thickness, and to assure the same quality as the original finish.
Features In Each Process:
Pretreatment and electrodeposition
In the pretreatment process, the entire body is degreased, cleaned, and coated with zinc phosphate by dipping.After the body has been cleaned with pure
water, it is placed in an electrolytic bath of soluble primer (Cationic Electrodeposition).
This produces a thorough corrosion inhibiting coating on the inner surface and corners of the body, pillars, sills, and panel joints.
Chipping primer is then applied to the most susceptible areas .
Intermediate coat
The intermediate coat is applied to the prepared surface to further protect against damage.
Top coat and overcoat clear coat
Enamel paint and either polyester or acrylic resin paint are used in the top coat for higher solidity, smoothness,brightness, and weather resistance.
