RL V6-3.5L (2007)
5. Separate the seat-back covers/pads (A) and seat- back frame (B).
6. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
7. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips,
and clips.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.