RL V6-3.5L (2007)
Seat Fan: Service and Repair
Front Seat Ventilation Blower Motor/Duct Replacement
Seat-back Blower Motor/Duct
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the front seat.
2. Remove the seat-back.
3. Remove the seat-back cover and pad.
4. Disconnect the connector (A), then remove the blower motor/duct (B) from the seat-back frame.
5. Remove the clips, then separate the duct (A, B) and blower motor (C).
6. Install the blower motor/duct in the reverse order of removal.
NOTE: Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
Seat Cushion Rear Blower Motor/Duct
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the front seat.
2. Remove the front seat cushion cover.
