RL V6-3.5L (2007)
3. Disconnect the blower motor connector (A), then remove the connector from the bracket.
4. Remove the screws, and release the hooks (A) from cushion frame wire, then remove the blower motor/duct (B).
5. Remove the clips, then separate the duct (A) and blower motor (B).
6. Install the blower motor/duct in the reverse order of removal.
NOTE: Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
Seat Cushion Front Blower Motor
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.