RL V6-3.5L (2007)
33. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0002, 08718- 0003, or 08718-0009, evenly to the engine block mating surface of the
oil pump.
NOTE: Do not install components if too much time has passed after applying the liquid gasket (for P/N 08718-0002, no more than 4 minutes,
for all others, no more than 5 minutes). Instead, remove the old residue and reapply the liquid gasket.
34. Grease the lip of the oil seal, and apply oil to the new O-ring (A).
35. Install the dowel pins (B), then align the inner rotor with the crankshaft, and install the oil pump (C).
NOTE:
^
Wait at least 30 minutes before filling the engine with oil.
^
Do not run the engine for at least 3 hours after installing the oil pump.
36. Clean the excess grease off the crankshaft, and check the seal for distortion.
37. Install the baffle plate (D), then install the oil screen (E) with new O-ring (F).