RL V6-3.5L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley Removal and Installation
Special Tools Required
^
Holder handle 07JAB-001020A
^
Crankshaft pulley holder 070AB-RJA0100
^
Socket, 19 mm 07JAA-001020A, or a commercially available 19 mm socket
Removal
1. Remove the right front wheel.
2. Remove the splash shield.
3. Remove the drive belt.
4. Hold the pulley with the holder handle (A) and holder attachment (B).
5. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar, then remove the crankshaft pulley.
Installation
1. Remove any oil or clean the pulleys (A), crankshaft (B), bolt (C), and washer (D). Lubricate with new engine oil as shown.
