RL V6-3.5L (2007)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Pulley
Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
^
1 Hold the pulley with the holder handle (A) and holder attachment (B), then tighten the bolt to 64 Nm (6.5 kgf-m, 47 ft. lbs.) with a torque
wrench and 19 mm socket (C).
^
2 Mark the bolt head (D) and crankshaft pulley (E) as shown, then tighten the bolt an additional 60° (The mark on the bolt head lines up with
the mark on the crankshaft pulley).
