RL V6-3.5L (2007)
Air Register: Service and Repair
Driver's Vent Panel
Driver's Vent Panel Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the dashboard and related parts.
1. Remove the instrument fascia.
2. Gently pull out the driver's vent panel (A) to release the clips (B, C), then remove the panel.
3. Install the panel in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.