RL V6-3.5L (2007)
7. Remove the mounting nut from the heater unit. Take care not to damage or bend the fuel lines and the brake lines, etc.
8. Remove the dashboard.
9. Disconnect the connectors (A) from the power tilt! telescopic steering control unit, the adaptive front lighting control unit, the electronically
controlled power steering control unit, and the daytime running lights control unit. Remove the relay (B) and the power tilt/telescopic steering
control unit (C), then remove the self-tapping screws and the bracket (D).
10. Disconnect the connectors (A) from the driver's cool vent control motor, the driver's air mix control motor, the mode control motor, and the
evaporator temperature sensor, then remove the wire harness clips (B).