RL V6-3.5L (2007)
11. Disconnect the connectors (A) from the blower motor, the power transistor, the control motor relay, the throttle actuator control module
subharness, and dashboard wire harnesses. Remove the connector clip (B) and the wire harness clips (C).
12. Disconnect the connectors (A) from the recirculation control motor, the passenger's cool vent control motor" the passenger's air mix control motor,
and the rear vent control motor, and then remove the wire harness clip (B) and the wire harness (C).
13. Remove the clips (A), the mounting nuts, and the blower-heater unit (B).