RL V6-3.5L (2007)
Clockspring Assembly / Spiral Cable: Service and Repair
Cable Reel Replacement
Removal
1. Make sure the wheels are aligned straight ahead.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes.
3. Remove the driver's airbag.
4. Disconnect the connector (A) from the cable reel, then remove the steering wheel nut (B).
5. Align the front wheels straight ahead, then remove the steering wheel with a steering wheel puller. Do not tap on the steering wheel or the steering
column shaft when removing the steering wheel.
6. Remove the driver's dashboard lower cover.
7. Remove the column cover screws (A), then remove the column covers (B, C).
8. Disconnect the dashboard wire harness A 4P connector (A) from the cable reel 4P connector (B), then disconnect the dashboard wire harness B
('05 model) or the dashboard wire harness A ('06-07 models) 20P connector (C) from the cable reel (D).
