RL V6-3.5L (2007)
9. Release the lock tab (A) under the cable reel connector with a 90 ° hook shaped tool (B). Slide the tool below the cable reel connector just above
the lock tab. Release the lower lock tab (C), and slide the cable reel off the column.
Installation
1. Before installing the steering wheel, align the front wheels straight ahead.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes.
3. Set the turn signal cancelling sleeve (A) so that the projections (B) are aligned vertically.
4. Carefully install the cable reel (A) on the steering column shaft. Then connect the 20P connector (B) to the cable reel, and connect the 4P
connector (C) to the dashboard wire harness 4P connector (D).
5. Install the steering column covers.
