RL V6-3.5L (2007)
After a moderate to severe side or rear collision, inspect for any damage on the side curtain airbag or other related components. According to the degree
of damage, replace components as needed.
During the repair process, inspect these areas:
-
Inspect all the SRS wire harnesses. Replace, do not repair, any damaged harnesses.
-
Inspect the cable reel for heat damage. If there is any damage, replace the cable reel.
After the vehicle is completely repaired, turn the ignition switch ON (II). If the SRS indicator comes on for about 6 seconds and then goes off, the SRS
is OK. If the indicator does not function properly, use the HDS SRS Menu Method to read the DTC. If you cannot retrieve a code, go to SRS Symptom
Troubleshooting. See: Air Bag Systems/Testing and Inspection/Symptom Related Diagnostic Procedures/Index, Symptom Troubleshooting
