RL V6-3.5L (2007)
Starter Motor: Removal and Replacement
Starter Removal and Installation
Removal
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's radio presets. Make sure the
ignition switch is OFF.
2. Remove the battery trim.
3. Disconnect the negative cable from the battery first, then disconnect the positive cable.
4. Remove the intake manifold cover.
5. Remove the vacuum hose (A) and transmission dipstick (B)
6. Remove the harness clamp (A)
7. Disconnect the starter cable (B) from the B terminal, then disconnect the BLK/WHT wire (C) from the S terminal.
8. Remove the two bolts holding the starter, then remove the starter.
