RL V6-3.5L (2007)
Installation
1. Install the starter (A) using a new gasket (B), then install the harness clamp (C) and connect the B terminal (D). and BLK/WHT wire (E). Make
sure the crimped side of the B terminal is facing out.
2. Install the vacuum hose (A) and transmission dipstick (B)
3. Install the intake manifold cover.
4. Connect the positive cable to the battery first, then connect the negative cable.
5. Install the battery trim.
6. Start the engine to make sure the starter works properly.
7. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's audio presets.
8. Do the power window control unit reset procedure.
