RL V6-3.5L (2007)
Shifter A/T: Removal and Replacement
Steering Wheel Upshift (+) Switch Replacement
Steering Wheel Upshift (+) Switch Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures in the SRS before performing
repair or service.
1. Remove the steering wheel.
2. Remove the steering wheel rear cover (A).
3. Remove the steering wheel upshift (+) switch connector from its holder, and disconnect the connector.
4. Remove the screw (B) securing the steering wheel upshift (+) switch (C), then remove and replace the switch.
5. Install the new steering wheel upshift (+) switch with the screw, connect the connector, and install the connector in the holder.
6. Install the steering wheel rear cover.
7. Install the steering wheel.
