acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Shift Lever Removal|Page 5328 > < Shift Lever Removal|Page 5326
Page 1
background image

Shifter A/T: Removal and Replacement
Steering Wheel Downshift (-) Switch Replacement

Steering Wheel Downshift (-) Switch Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures in the SRS before performing
repair or service.

1. Remove the steering wheel.
2. Remove the steering wheel rear cover (A).

3. Remove the steering wheel downshift (-) switch connector from its holder, and disconnect the connector.
4. Remove the screw (B) securing the steering wheel downshift (-) switch (C), then remove and replace the switch.
5. Install the new steering wheel downshift (-) switch with the screw, connect the connector, and install the connector in the holder.
6. Install the steering wheel rear cover.
7. Install the steering wheel.

Shift Lever Removal|Page 5328 > < Shift Lever Removal|Page 5326