RL V6-3.5L (2007)
12. Set the companion flange (A) onto the front case (B) by aligning the reference mark (C), then install the 36 mm socket (D), the 8 mm flange bolt
(E), and the 8 mm nut (F) as shown.
13. Tighten the 8 mm nut, then install the companion flange.
14. Install the new 23 mm O-ring (A), the 23 mm backup ring (B), the 22 mm spring washer (C), and the new 22 mm locknut (D).
15. Install the companion flange holder to the companion flange, then tighten the new 22 mm locknut to the specified torque.