RL V6-3.5L (2007)
24. Tighten the 8 mm nut, then install the companion flange.
25. Install the new 23 mm O-ring (A), the 23 mm backup ring (B), the 22 mm spring washer (C), and the new 22 mm locknut (D).
NOTE: Apply ATF to the 23 mm O-ring.
26. Install the companion flange holder to the companion flange, then tighten the new 22 mm locknut to the specified torque.
27. Stake the locknut tab (A) into the groove in the input shaft.
28. Install the rear differential.
