RL V6-3.5L (2007)
Seals and Gaskets: Service and Repair
Center Case Side Oil Seal Replacement
Center Case Side Oil Seal Replacement
Special Tools Required
-
Oil seal driver A 070AD-RJC0110
-
Oil seal driver B 070AD-RJC0120
-
Driver handle 15 x 135L 07749-0010000
-
Attachment, 78 x 90 mm 07GAD-SD40101
1. Remove the rear differential.
2. Remove the left side case (A), the right side case (B), the six 8 x 14 mm dowel pins (C), and the two O-rings (D).
3. Remove the 60 x 89 x 6.5 mm oil seal (A) from the right side center case (B) with a commercially available seal remover.
4. Remove the 60 x 80 x 6.5 mm oil seal (A) from the left side center case (B) with a commercially available seal remover.
5. Remove the differential carrier cover (A), the 156 x 3.5 mm O-ring (B), the 8 x 14 mm dowel pin (C), and the 7.7 x 2.3 mm O-ring (D).