RL V6-3.5L (2007)
6. Remove the 70 x 100 x 20 mm bearing outer race (A) and 100 mm shim (B) from the differential carrier cover (C) by heating the differential
carrier cover to about 212°F (100°C) with a heat gun (D). Do not heat the differential carrier cover in excess of 212°F (100°C).
NOTE: Let the differential carrier cover cool to room temperature before installing the bearing outer race.
7. Remove the 60 x 89 x 6.5 mm oil seal and the 60 x 80 x 6.5 mm oil seal from the differential carrier cover.
8. Install the new 60 x 80 x 6.5 mm oil seal (A) into the differential carrier cover (B) with the driver and driver handle.
