RL V6-3.5L (2007)
9. Install the new 60 x 89 x 6.5 mm oil seal (A) into the differential carrier cover (B) with the driver and driver handle.
10. Install the 100 mm shim (A) and the 70 x 100 x 20 mm bearing outer race (B) into the differential carrier cover (C) with a press.
11. Install the 8 x 14 mm dowel pin (A), the new 7.7 x 2.3 mm O-ring (B), the new 156 x 3.5 mm O-ring (C), and the differential carrier cover (D)
onto the center case (E).
12. Install the new 60 x 80 x 6.5 mm oil seal (A) into the right side center case (B) with the driver and driver handle, and attachment.