RL V6-3.5L (2007)
13. Install the new 60 x 89 x 6.5 mm oil seal (A) into the left side center case (B) using the driver and driver handle, and attachment.
14. Remove the dirt and oil from the sealing surfaces. Apply liquid gasket (P/N 08718-0001) to the sealing surface. Make sure you seal the entire
circumference of the bolt holes to prevent oil leakage.
NOTE:
-
You must assemble the housings with you do in 5 minutes after applying the liquid gasket. If not, the sealing surface must be cleaned, and the
liquid gasket reapplied.
-
Allow it to cure at least 30 minutes after assembly before filling the differential with fluid.
