RL V6-3.7L (2009)
14. Reconnect the 6P connector, and reattach the clip.
15. Reinstall the rearview camera with the arrow on the bracket pointing up. Firmly seat the bracket (bottom first) in the trunk lid hole, then gently snap
in the top of the bracket.
NOTE:
The bracket clip is delicate and can be broken if the hook is not seated correctly.
16. Test the rear camera operation while in reverse.
NOTE: The camera brightness is adjusted by rotating the interface knob while viewing the image.
17. Reinstall the connector clip. If the clip is damaged, replace it.
18. Reinstall the rear license trim, the trunk lid trim, the trunk lid cushions, and the trunk light.
