RL V6-3.7L (2009)
1. Remove the front door sash inner trim. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Sash Inner Trim Replacement
2. Remove the screws and tweeter speaker (A) from the quarter inner trim (B).
3. Measure the resistance between the front door tweeter 2P connector terminals No. 1 and No. 2. There should be about 3.6 Ohms.
4. If the resistance is not as specified, replace the front door tweeter.
Rear Twiddler
1. Remove the rear shelf. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
2. Disconnect the 2P connector (A), then remove the connector (B) from the rear twiddler bracket (C).
3. Remove the screws and the rear twiddler (D).
4. Measure the resistance between the terminals No. 1 and No. 2. There should be about 4 Ohms.
5. If the resistance is not as specified, replace the rear twiddler speaker.
Front Center Speaker
NOTE:
-
Put on gloves to protect your hands.
-
Take care not scratch the dashboard.
1. Remove the dashboard upper visor (A).
2. Disconnect the connectors (B).
