RL V6-3.7L (2009)
Front Bumper: Service and Repair
Front Bumper Removal/Installation
Front Bumper Removal/Installation
Special Tools Required
-
Push pin puller 07AAC-SJAA100
NOTE:
-
Have an assistant help you when removing and installing the front bumper.
-
Take care not to scratch the front bumper and the body.
-
Put on gloves to protect your hands.
1. Remove these items:
-
Front air spoiler See: Front Air Spoiler Replacement
-
Upper grille cover See: Grille/Service and Repair/Upper Grille Cover Replacement
2. Remove the bolts (A, B), screws (C), and the clips (D) securing the front bumper (E).
3. Pull on the front bumper (A) at the wheel arch areas to release it from the hooks (B) on the side spacers (C).
4. With the help of an assistant, pull the wheel arch portion away from the side spacer (A) while pulling the front bumper (B) to release the bumper
from the hooks (C) on the corner upper beam (D).