RL V6-3.7L (2009)
5. With the help of an assistant, pull the rear bumper (A) to release the bumper from the hooks (B) on both upper brackets (C).
6. Release the hooks, then remove the rear bumper absorber (A).
7. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the rear bumper engages the hooks (of both upper bracket, side bracket, and side spacers) on each side securely.
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and the hooks into place securely.
