RL V6-3.7L (2009)
Power Trunk / Liftgate Lock Switch: Service and Repair
Trunk Lid Opener Switch Test/Replacement
Trunk Lid Opener Switch Test/Replacement
1. Remove the driver's door panel. See: Doors/Front Door/Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
2. Disconnect the 10P connector (A) from the switch (B).
3. Check for continuity between terminals No. 1 and No. 9.
-
With the switch pushed, there should be continuity.
-
With the switch released, there should be no continuity.
4. If the continuity is not as specified, remove the two screws and replace the switch.