RL V6-3.7L (2009)
11. Install the headliner in the reverse order of removal, and note these items:
-
If the side curtain airbag has been deployed, replace the headliner and front grab handle on deployed side with new ones.
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the A-pillar trim, and replace it if it has any
of these types of damage:
-
Any creases or tears in the headliner (A)
-
Any fasteners (B) or clip bases (C) which have come off the headliner
-
Any damage around the grab handle holes (D) or sunvisor holes (E) in the headliner
-
Any deformations in the grab handle (F)
-
Any cracks in the sunvisor stay base (G)
-
Any bends or cracks in the sunvisor stay shaft (H)
-
Any cracks in the sunvisor base (I)
-
Any cracks in the vanity mirror base (J)
-
Any deformations in the grab handle bracket
-
Replace any damaged parts with new ones.
-
Replace the removed aluminum seals with new ones.
-
Make sure the grab handle clips (K) are installed securely to the grab handle bracket (L).
-
Make sure the headliner overlaps the trim pieces correctly. See: Restraint Systems/Air Bag Systems/Service and Repair
-
When passing the headliner through the door opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
-
If the threads on a visor screw are worn out, use an oversized self-tapping ET screw P/N 90137-S30-003 made specifically for this application.
-
Check that both sides of the headliner are securely attached to the trim.
Headliner