RL V6-3.7L (2009)
11. Carefully reinstall the grommet (A) on the pin (B) and seat them on the C-pillar trim (C) as shown.
12. Place the C-pillar trim (A) over the C-pillar (B), and fit its upper clip (C) and the other clips (D, E) into holes (F) in the C-pillar, then lightly push
the trim into place.
NOTE:
-
Make sure the side curtain airbag is not tucked down under the clips.
-
Push lightly on the upper clip. If you push too hard, the clip will be damaged, and it will not hold the trim properly.
13. Reinstall the seat side trim (A). Push the clips and the hook (B) portions into place securely.
