RL V6-3.7L (2009)
5. Remove the B-pillar upper trim (A).
6. Install the trim in the reverse order of removal, and note these items:
-
If the clip (A) is damaged or stress-whitened, replace it with a new one.
-
If the side curtain airbag has deployed, replace the B-pillar upper trim with a new one.
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the trim, and replace it if it has any of these
types of damage:
-
Any cracks or deformations in the B-pillar upper trim (B) and the upper hook (C), and any press-whitenings in the upper part of the trim
-
Any cracks or stress-whitening in the clip seating surface (D)
-
Replace any damaged parts with new ones.
-
Make sure the top of the trim overlaps with the headliner correctly. See: Restraint Systems/Air Bag Systems/Service and Repair
-
Make sure the pin (E) on the front seat belt shoulder anchor adjuster (F) and the hole (G) on the back of the slider are engaged when installing
the B-pillar upper trim.
-
Make sure the trim hook is installed into the side curtain airbag B-pillar bracket securely.
-
Push the clip and the hooks into place securely.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
