RL V6-3.7L (2009)
Utility Storage Compartment: Service and Repair
Utility Pocket Removal/Installation
Utility Pocket Removal/Installation
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the trim and the panels.
1. Remove the center console panel. See: Console/Service and Repair/Removal and Replacement/Center Console Removal/Installation
2. Remove the inner case (A), then remove the screws.
3. Pull out the utility pocket (A), disconnect the ambient light bulb socket (B), then remove the pocket.
4. Install the pocket in the reverse order of removal, and note these items:
-
Make sure the bulb socket is connected securely.
-
Make sure the ambient light wire harness is not pinched.
