RL V6-3.7L (2009)
Head Rest: Service and Repair
Rear Seat Head Restraint Cover/Pad Replacement
Rear Seat Head Restraint Cover/Pad Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the head restraint. See: Rear Seat Head Restraint Replacement
2. Unzip the head restraint cover (A), pull it back, and remove it.
3. Separate the double-sided adhesive tapes (A), then remove the head restraint pad (B) and the head restraint pad molding (C) from the head
restraint frame (D).
4. Scrape off the remaining double-sided adhesive tape from the head restraint frame, then clean its surface with a shop towel dampened with
isopropyl alcohol.
5. Install the cover and pads in the reverse order of removal.