RL V6-3.7L (2009)
Head Rest: Service and Repair
Rear Seat Head Restraint Replacement
Rear Seat Head Restraint Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the rear seat-back. See: Service and Repair/Rear Seat Removal/Installation
2. Remove the seat-back cover/pad. See: Seat Cover/Service and Repair/Rear Seat-back Cover Replacement
3. Disconnect the connector (A), and detach it from the seat-back frame. Detach the wire harness clip (B), and remove the harness band (C) (right
side head restraint only).
4. Remove the retainers (A) from both head restraint guides (B), then remove the head restraint (C). Remove both head restraint guides.
5. Install the head restraint in the reverse order of removal.
