RL V6-3.7L (2009)
Power Seat Motor: Service and Repair
Front Seat Up-Down Motor Replacement
Front Seat Up-down Motor Replacement
Front Up-down Motor - 8-Way Power Seat
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear the seam or damage the seat covers.
1. Remove the front seat. See: Service and Repair/Front Seat Removal/Installation
2. Remove the seat cushion cover/pad. See: Seat Cover/Service and Repair/Front Seat Cushion Cover Replacement
3. Remove the front up-down motor (A) and the front up-down motor bracket (B) as an assembly:
-1 Disconnect the motor connector (C).
-2 Using a TORX T30 bit, remove the motor bracket mounting bolts (D).
-3 Using a TORX T40 bit, remove the motor bracket mounting bolt (E).
4. Detach the motor connector (A). Using a TORX T30 bit, remove the bolts, then remove the front up-down motor (B) from the front up-down
motor bracket (C).
5. Install the motor in the reverse order of removal, and note these items:
-
Apply multipurpose grease to the pivot portions of the up-down adjuster and the motor pinion.