RL V6-3.7L (2009)
Seat Fan: Service and Repair
Front Seat Ventilation Blower Motor/Duct Replacement
Seat-back Blower Motor/Duct
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the front seat. See: Service and Repair/Front Seat Removal/Installation
2. Remove the seat-back cover and the pad. See: Seat Cover/Service and Repair/Front Seat-back Cover Replacement
3. Disconnect the connector (A) and remove the screws, then remove the blower motor/duct (B) from the seat-back frame.
4. Remove the clips, then separate the duct (A, B) and the blower motor (C, D).
5. Install the blower motor/duct in the reverse order of removal.
NOTE: If the clips are damaged or stress-whitened, replace them with new ones.
Seat Cushion Rear Blower Motor/Duct
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or service.
NOTE:
-
Take care not to tear the seams or damage the seat covers.