RL V6-3.7L (2009)
-
Put on gloves to protect your hands.
1. Remove the front seat. See: Service and Repair/Front Seat Removal/Installation
2. Remove the front seat cushion cover. See: Seat Cover/Service and Repair/Front Seat Cushion Cover Replacement
3. Disconnect the blower motor connector (A), then remove the connector from the bracket.
4. Release the wire bands (A) and clips (B) securing the blower duct (C) to the seat cushion springs (D).
5. Remove the screws, and release the hooks (A) from the cushion frame wire, then remove the blower motor/duct (B).
6. Remove the clips, then separate the duct (A) and the blower motor (B).
7. Install the blower motor/duct in the reverse order of removal.
NOTE: If the clips are damaged or stress-whitened, replace them with new ones.
