RL V6-3.7L (2009)
2. Disconnect the 3P connector (A) from the seat cushion heater.
3. Check for continuity between the seat cushion heater 3P connector terminals No. 1 and No. 3, and terminals No. 2 and No. 3. There should be
continuity. If there is no continuity, replace the seat cushion heater.
Rear Seat (Canada models only)
1. Remove the rear seat cushion and the rear seat-back. See: Service and Repair/Rear Seat Removal/Installation
2. Disconnect the 3P [4P] connector (A) from the left [right] seat cushion heater, and 2P connectors from the seat-back heaters.
Left Rear Seat Cushion Heater Test
3. Check for continuity between the seat cushion heater 3P connector terminals No. 1 and No. 2, and terminals No. 2 and No. 3. There should be