RL V6-3.7L (2009)
Radiator: Service and Repair
Radiator Replacement
1. Drain the engine coolant. See: Coolant/Service and Repair
2. Remove the right side fender trim.
3. Raise the vehicle on the lift to full height.
4. Remove the splash shield. See: Engine/Service and Repair/Engine Removal
5. Disconnect the lower radiator hose (A).
6. Disconnect the automatic transmission fluid (ATF) cooler hoses (B), then plug the hose and line.
7. Disconnect the engine coolant temperature (ECT) sensor 2 connector (C).
8. Lower the vehicle on the lift.
9. Disconnect the upper radiator hose (A) and the coolant reservoir hose (B).
10. Remove the air intake duct cover (A), the coolant reservoir (B), and the radiator upper brackets (C).
11. Remove the A/C condenser fan shroud assembly and the radiator fan shroud assembly. See: Radiator Cooling Fan/Service and Repair
