RL V6-3.7L (2009)
12. Pull up the radiator, then remove the radiator cap (A), the ETC sensor 2 (B), and the drain plug (C).
13. Reassemble the radiator with new O-rings (D).
14. Install the radiator. Make sure the lower cushions (E) are set securely.
15. Install the radiator fan shroud assembly and the A/C condenser fan shroud assembly. See: Radiator Cooling Fan/Service and Repair
16. Install the radiator upper brackets (A), the coolant reservoir (B), and the air intake duct cover (C).
17. Install the upper radiator hose (A) and coolant reservoir hose (B).