RL V6-3.7L (2009)
18. Lower the vehicle on the lift.
19. Install the lower radiator hose (A) and the ATF cooler hoses (B).
20. Connect the ECT sensor 2 connector (C).
21. Install the splash shield. See: Engine/Service and Repair/Engine Installation
22. Lower the vehicle on the lift.
23. Install the right side fender trim.
24. Refill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open. See: Coolant/Service and Repair
25. Clean up any spilled engine coolant.