RL V6-3.7L (2009)
and Pulley Installation
12. Install the timing belt. See: Timing Components/Timing Belt/Service and Repair/Timing Belt Installation
13. Install the vacuum line and the purge joint.
14. Install the intake manifold. See: Intake Manifold/Service and Repair/Intake Manifold Removal and Installation
15. Connect the fuel feed hose, See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Fuel
Line/Quick-Connect Fitting Installation then install the quick-connect fitting cover.
16. Adjust the valve clearance. See: Cylinder Head Assembly/Valve Clearance/Adjustments
17. Inspect for fuel leaks. Turn the ignition switch to ON (II) (do not operate the starter) so the fuel pump runs for about 2 seconds and pressurizes the
fuel line. Repeat this operation three times, then check for fuel leakage at any point in the fuel line.
18. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview