RL V6-3.7L (2009)
12. With the specified air pressure applied, rotate the crankshaft pulley clockwise, and visually check all exhaust rocker primary arms (A) and exhaust
secondary rocker arms (B) move together.
-
If the exhaust primary rocker arm and the exhaust secondary rocker arm move independently, remove the exhaust primary rocker arm and the
exhaust secondary rocker arm as an assembly, and check that the pistons in the rocker arms move smoothly. If any exhaust rocker arm needs
replacing, replace the primary and secondary rocker arms as an assembly, then retest.
-
If the exhaust primary rocker arm and the exhaust secondary rocker arm move together, go to step 13.
13. Remove the air pressure regulator, the VTEC/VCM air adapter, the VTEC air stop tool A, and the VTEC air stop tool B.
14. Tighten the sealing bolts to 22 N-m (2.2 kgf-m, 16 lbf-ft).
15. Install the cylinder head covers. See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover Installation
16. Install the six spark plugs.